Mattress Assembly

Mattress Boxes:

The Sunshine 8" Mattress will be packed in 3 boxes.

The Sunshine 11" Mattress will be packed in 4 boxes.

The Junior Sunshine in Twin size and the Baby Sunshine will be packed in 1 box and will not require assembly.

The Junior Sunshine Double size will be packed in 2 boxes and will require assembly.

Foundation Boxes:

The 4" Foundation option will ship in 1 box, while the 7" option will ship in 2 boxes.

The foundation will include 12 legs (6 legs for Twin size) and will also include felt pads for protection against hard surfaces.

The Foundation can be used with or without the legs and is to be placed down on the ground or frame first.

Internal Layering:

All boxes will be labelled on the outside, it is recommended to open the box labelled with Mattress Encasement first.

Each piece of rubber has been labelled with Firm, Medium or Soft.
The Firm layer is usually at the bottom, while the Medium and Soft Layers are at the top. 

Anytime you are trying to achieve a Firmer feel on one side, it is recommended to take the Firm from the bottom and move it so that it is closer to the body
 

Step 1

Locate the cutter to unwrap plastic packaging.

Carefully cut the bag by following the dotted lines.
Do this step slowly to ensure that the cutter does not get caught in the organic cotton fabric.

The mattress will slowly expand.
Make sure no pets or kids are around when opening your mattress.

Step 2

Lay the cover over a foundation or solid-slatted base, so that the open end is at the head of the bed.
When using a slatted base, just make sure the corners are fully stretched out ready for the rubber layers to be placed in it.

The cover is always packed with the 2" Soft layer.
This layer is not split and is always best on top of all the split layers.

*see below for mattress instructions: Sunshine 11", Sunshine 8", Junior Sunshine

Adult Sunshine 11"

Pull all corners of the cover down over your foundation so that the cover is tightly wrapped around it like shown on the picture.
Start by placing the 3" Firm base layer on the cover. Make sure that the rubber layer meets each corner of the covering and lines up with the foundation.
Then place the second Firm layer beside it, gently pull and push the material so that it lines up on all sides.
You may then place the 3" middle layer(s) right on top of the base layer. This layer will be Firm or Medium and can be swapped with your base layer for a firmer feel.
You may then place the last 3" middle layer(s) right on top of the base layer. This layer will be Medium or Soft and can be swapped with your middle or base layer for a firmer feel.
The last piece will be the 2" soft rubber top layer. Always make sure that this piece is well aligned and nicely squared with the other pieces.
Now, pull the top of the cover tightly over the mattress. Start zipping each side of the bed while pulling down on the top of the cover to relieve stress on the zipper. The two zippers should meet at the head of the bed.

Adult Sunshine 8"

Pull all corners of the cover down over your foundation so that the cover is tightly wrapped around it like shown on the picture.
Start by placing the 3" Firm base layer on the cover. Make sure that the rubber layer meets each corner of the covering and lines up with the foundation.
Then place the second Firm layer beside it, gently pull and push the material so that it lines up on all sides.
You may then place the 3" middle layer(s) right on top of the base layer. This layer will be Firm, Medium or Soft and can be swapped with your base layer for a firmer feel.
The last piece will be the 2" soft rubber top layer. Always make sure that this piece is well aligned and nicely squared with the other pieces.
Now, pull the top of the cover tightly over the mattress. Start zipping each side of the bed while pulling down on the top of the cover to relieve stress on the zipper. The two zippers should meet at the head of the bed.

Junior Sunsine

Pull all corners of the cover down over your foundation so that the cover is tightly wrapped around it like shown on the picture.
Start by placing the 3" Firm base layer on the cover. Make sure that the rubber layer meets each corner of the covering and lines up with the foundation.
You may then place the 3" middle layer right on top of the base layer. This layer will be Medium and can be swapped with your base layer for a firmer feel.
Now, pull the top of the cover tightly over the mattress. Start zipping each side of the bed while pulling down on the top of the cover to relieve stress on the zipper. The two zippers should meet at the head of the bed.

Place your protector over the mattress, and you are ready for your first nap!

Sign Up for

our latest newzzz

Latest Blog

Sleeping Tips While Pregnant
  As many women enter pregnancy, they are faced with many physical issues including cramps. morning sickness...
8 Reasons Why Sunshine Mattress is the Best Mattress
Latex mattresses are one of the most popular types available, they are a healthier, more comfortable and of course ...
How to Get That Perfect Hotel Mattress
A customer spoke to me a little while back. She told me she had woken up without pain for the first time in years.&...